EFHW-4010-P

(16 customer reviews)

$119.99

EFHW-4010P Multiband End Fed Half Wave Antenna

  • 40 / 20 / 15 / 10m – no tuner needed (WARC bands with a tuner)
  • 63 ft (19.2 m) of stealth #16 AWG black XLPE wire on a spool
  • Complete kit weighs only 590 g (1 lb 5 oz)
  • 200W ICAS; 100W for FT8 and digital modes
  • No counterpoise, no radials, no ground rod
  • Built for POTA, SOTA, ARES, and EMCOMM — and HOA-friendly home stations

New to end-fed antennas? All About EFHW Antennas • Instruction manual

SKU: EFHW-4010-P Category: Tags: ,

Description

EFHW-4010-P – Portable End-Fed Half-Wave Antenna, 40/20/15/10m

The EFHW-4010-P is our lightweight, no-tuner multiband HF antenna: 40, 20, 15, and 10 meters from a single 63 ft wire, with the complete kit weighing just 590 g (1 lb 5 oz). It is built for operators who carry their station — POTA and SOTA activators, EMCOMM and ARES teams, campers and travelers — and for home stations where a discreet antenna matters. New to end-fed antennas? Read our complete guide: All About EFHW Antennas.

No Tuner. No Counterpoise.

The 63 ft wire is a true half-wave on 40m (7 MHz). Because 20, 15, and 10m are harmonics of 40m, the same wire is also resonant on those bands, and our 56:1-class transformer matches all four to 50 ohms without a tuner, traps, or radials. The return path is provided by the coax shield, exactly as on our home-station EFHWs, so the antenna works the same way in a park as it does in your backyard — no counterpoise wire and no ground rod. (Why: About Counterpoise.)

The WARC bands (30, 17, and 12m) are not harmonics of 40m, so the antenna is not resonant there; use a tuner if you want to operate them. If you need WARC coverage without a tuner, see the 130 ft EFHW-8010 series.

Key Specifications

  • Resonant bands, no tuner: 40 / 20 / 15 / 10m
  • WARC bands (30 / 17 / 12m): tuner required
  • Frequency coverage: 7–30 MHz
  • Power: 200W ICAS (SSB and CW); 100W maximum for FT8 and other continuous digital modes
  • Wire: 63 ft (19.2 m) of #16 AWG black XLPE, flexible and UV-resistant
  • Connector: silver-plated SO-239 with PTFE (Teflon) insulation
  • Hardware: stainless steel throughout
  • Weight: 590 g (1 lb 5 oz) complete
  • Package: 9 × 6 × 2 in
  • Included: transformer, 63 ft wire on a spool, and mounting hardware
  • Options: antenna only, or with 50 ft or 100 ft of RG8X coax

Installation Options

Because it is fed at one end, the EFHW-4010-P needs only one coax run, and the wire can follow whatever supports you have:

  • Inverted L: transformer low, wire running up a tree, mast, or telescopic pole, then across to a second support. The vertical section favors low-angle radiation for DX, and it is the quickest field setup with a single tall support.
  • Sloper: one high support, the low end at least 10 ft up. Good for DX in the direction of the slope.
  • Horizontal or inverted V: the classic setup between two supports. At modest height on 40m, a horizontal or inverted-V installation favors high-angle radiation for regional and NVIS coverage.
  • Vertical: from a tall mast or tree, for low-angle DX on the higher bands.

The 4010 design is far less height-sensitive than our longer antennas and performs well anywhere from about 10 to 50 ft. Keep the wire at least 3 ft from metal, power lines, gutters, and metal roofing, and do not lay it on shingles. Let it hang with natural sag rather than pulling it tight. The black wire disappears against trees and buildings, which makes this antenna a favorite for HOA-restricted lots.

Field Tips

  • Bring 25–50 ft of coax. RG8X is fine at this power level, and the 50 ft option is a good all-round length for portable work.
  • Height beats perfection. Get the far end as high as your support allows; the transformer end can be low.
  • Check SWR once per setup. Nearby trees, vehicles, and buildings shift the curve slightly from site to site. That is normal — see About SWR.
  • Wind the wire back on the spool after each activation to avoid kinks.

Applications

POTA and SOTA activations • EMCOMM, ARES, and RACES • ALE and HFlink • NVIS and MARS • stealth and HOA installations • QRP through 200W home stations.

About the SWR Charts

The SWR plots in the gallery were measured with the antenna installed horizontally at 25 ft over open ground. Your results will vary with height, configuration, and nearby objects — buildings, towers, vehicles, and other antennas inside the antenna’s near field all shift the feed point impedance. Higher and clearer is always better. Each antenna includes a little extra wire for fine tuning: cut, never fold, and trim conservatively. The full procedure is in All About EFHW Antennas.

Grounding

For a permanent installation, ground the coax shield where the cable enters your home, per NEC-810, to bleed off static buildup. Grounding does not affect antenna tuning. Details: About Grounding.

Choosing Within the 4010 Family

All 4010 models cover 40/20/15/10m in 63 ft; they differ in power and weight:

  • EFHW-4010-P (this page) — 200W ICAS portable kit, wire on a spool, 1 lb 5 oz
  • EFHW-4010-LP — 250W ICAS, stealth #16 wire
  • EFHW-4010-1K-ICAS — 1kW ICAS for mid-power stations
  • EFHW-4010-2K-Plus — 2kW, three 3-inch cores, for legal-limit amplifiers

Frequently Asked Questions

Does the EFHW-4010-P need a tuner?
Not on 40, 20, 15, or 10m. Use a tuner only for the WARC bands (30, 17, 12m).

Does it need a counterpoise or ground rod in the field?
No. The coax shield provides the return path, the same as at home.

Can I run FT8 at 100W?
Yes. 100W is the maximum for FT8 and other continuous digital modes; SSB and CW are rated to 200W ICAS.

How high does it need to be?
It works well from about 10 to 50 ft. Higher and clearer of nearby objects is better, especially on 40m.

Will it work at QRP power?
Yes. Owners regularly report solid contacts at 5–10W, because there is no tuner loss and the transformer loss is low.

Instruction manual: EFHW installation manual.

 

Additional information

Weight 22 oz
Dimensions 9 × 6 × 2 in
EFHW-4010P

EFHW-4010P antenna only, EFHW-4010P with 50ft of RG8X coaxial cable, EFHW-4010P with 100ft of RG8X coaxial cable

16 reviews for EFHW-4010-P

  1. David –

    Almost 200 QSOs including 37 states and 20 countries in the first month with this antenna, at about 35 feet in a valley QTH running 100w. SWR less than 1.4:1 across the phone portions of 40, 20, 15 and 10 meters. Great audio reports, very low noise. Contacts can’t believe I’m running barefoot on a wire. Thanks, Danny 73

  2. Howard –

    Received this about 3 weeks ago and finally had the opportunity to use it in an open space. Set up as an inverted-L at 25 – 30 feet above ground. As with the other EFHW’s I have purchased and built, I used about 5 feet of counterpoise with ~ 25′ of RG8X feedline. SWR was about 1.2:1 on 40M and 1:1 on 20, 15 and 10. Made a few QSO’s on 40 and 20, band conditions favored 40 in the couple days I played with it. One odd one though; could not complete the QSO from my location in South West Utah – the station on the other end was in England, just north of London. For the setup – outstanding!

    Very satisfied. Performed better than a similar model from another manufacturer and while SWR on my homebrew was 1:1 on 40 as well as 20 – 10; it was designed for about 40 – 50 watts maximum

  3. David Nuti –

    I read all the reviews about this antenna and was impressed. I decided it was time to replace my G5RV jr as it has taken a beating and wasn’t performing well. I purchased the 4010p and put it up as a sloper from a tree. I loved the stealth of it. Once it was hooked up I checked it. My SWR was all out of whack. Higher than 2.5 all over. Something is wrong. I went outside and gave my coax a good look. It was old and I found the casing cracked and frayed. Replaced the coax and BINGO! Perfect SWR across the board. Great reception, I’m hearing a lot more stations now. Time to make some contacts! I recommend this antenna. Easy to install too.

  4. Brian Dixon –

    This is my first HF antenna … it’s a little noisy for phone (voice) but I’ve had QSOs from Idaho to all over the USA and parts of Canada with it. But for DIGITAL modes such as FT-8, it rocks. I just had a QSO with a person in Osaka, Japan … over 7000 miles from Idaho! This morning’s gray-line propagation on 40m was awesome! Also QSO’d with a guy 4000+ miles from here in the middle of the Atlantic on a ship. Heard several TX from Indonesia today too (but they didn’t hear my 80W signal back … LOL). I do recommend this antenna!

  5. SATYAN vu3mes. –

    My 4010 was purchased in 2016 and has been a great performer since then. Recently I have connected the antenna to a QRP radio, 5 watts Yaesu ft817ND and works perfectly without a tuner. I am able to make good contacts on 40 and 20 MTRS with this set-up. Congratulations ?? for a great antenna.

  6. Brian Schmidt –

    Great antenna for POTA activations. Normally I use my ICOM 7300 running 100 watts with antenna from the parks I activate. Typically 6-15 ft above the ground (not too many tall trees in the parks here in central Nebraska). Yesterday worked 37 stations SSB in 45 minutes running 10 watts from a ICOM 705. Location was Medicine Creek SRA Nebraska K-9363. Three QSO with Alaska stations and 1 from the Azores. I recommend this antenna.

  7. TAKAO OGATA –

    I tried using it for SOTA operation. I took it to the mountain in the actual production, but the characteristics of SWR were not bad either.
    Normally, the signal was weak and it seemed that it was finally reaching the other party, but with this antenna it seems that a signal of sufficient strength has arrived.
    I will continue to use it habitually

  8. Dan laporte –

    I’ve had this antenna for a few years now. I use it as a sloper attached to a tree in my backyard. I work qrp cw with it. I’ve made contacts all over the US, signal reports in Canada and UK. All on 5 watts. Sad it’s discontinued. Great antenna!

  9. Chris –

    I have the 4010efhw 1000watt version and it works great with my fc20 tuner on the off bands. I also have a gap titan vertical that I have had for quite a few years and when I put up the end fed i started playing with the antenna switch in my tuner and for the last 2 months the end fed has blown the gap away on receive and transmit. I like it??

  10. William Bouchard –

    It is my go to EFHW antenna for POTA activations. I use a 15 foot telescopic mast for the transformer end and then just throw the wire end up into a nearby tree. With this solar cycle I started to get on 10 meters more and this antenna has performed excellent. N3EDO.

  11. Anonymous –

    Wish they still sold it.

  12. MIKE –

    Still trying to get usable SWR reading on many of the bands bands.

  13. Danny-E73M –

    Maybe asking support will help you find why SWR are not as you wish. The manual also provides an insight how it works and what to look for. Typical mistake is low height , wire over or parallel to homes, poles or other wires in the air. Expecting out of the box perfect SWR is not reason for three stars review. BTW you have 4 band antenna and if you expect more than that, check the manual.

  14. Tomas Rivera –

    Great antenna. Product as described. SWR ok at all the bands. Easy to set up.

  15. Fred T. –

  16. Dan M. –

    Antenna is performing great. May experiment with different configurations; currently a sloper mounted from 30’ to 50’.

  17. Gary W. –

    Great SWR right out of the box. Amazes me how you can work the world with a piece of wire.

Add a review

Your email address will not be published. Required fields are marked *